Why Choose Hire or Lease from Optimeasure?
Production demands change, project timelines tighten, and capital budgets don’t always align with immediate technical requirements. At Optimeasure, our Rental & Leasing fleet provides fast, flexible access to professional measurement and leak detection equipment without the commitment of outright purchase. Whether you require short-term support during peak production, validation for a new process, backup equipment during maintenance, or long-term leasing to spread capital expenditure, we offer fully serviced, ready-to-use systems that integrate seamlessly into your operation.
All our hire equipment is maintained, verified, and performance-checked prior to deployment giving you confidence that results remain accurate, repeatable, and compliant.
- Immediate availability, fast deployment to keep production moving
- Professionally maintained equipment in line with leak testing standards,, serviced and performance verified
- Flexible terms, from short-term rental to multi-year lease agreements
- Technical support included, expert backup when you need it
- CAPEX-friendly, reduce upfront spend and financial risk
- Our team can also assist with system setup, operator training, and process optimisation and ensuring you achieve reliable results from day one.
Our Hire & Rental Capabilities
Leak Detection Equipment
- Hydrogen tracer gas sniff testing – Inficon Sensistor Sentracs, Inficon H2000’s, ASH2000’s, ISH2000’s
- Helium tracer gas sniff testing – Inficon Flex XL
- Refrigerant tracer gas sniff testing – Ecotec II
- Pressure decay CTS-Schriener LPC’s (Various Models)
The Industry Leaders we Distribute & Integrate
Inficon / Sensistor: When “Small” Leaks are a Big Problem
The “Why”: If your product carries refrigerants, hydrogen, or high-pressure fuels, a “minor” leak isn’t just a failure—it’s a liability. Traditional air testing often lacks the sensitivity to detect the microscopic paths that these gases can find.
The “When”: Use Inficon/Sensistor technology when you need to detect leaks at a molecular level ($1 \times 10^{-7} \text{ mbar}\cdot\text{l/s}$). Whether you need a standalone sniffer for rework or a high-speed sensor integrated into an automated cell, these systems ensure your containment is absolute.
CTS Schreiner: Making “Waterproof” a Science, Not a Guess
The “Why”: Relying on a “dunk test” is messy, slow, and subjective. To hit IP66 or IP67 standards reliably, you need digital, repeatable data that proves your seals will hold under pressure.
The “When”: Choose CTS Schreiner when you need rapid, non-destructive air leak testing (pressure/vacuum decay) on the production floor. These instruments are built for high-duty cycles and provide the traceable “Pass/Fail” data required to satisfy your most demanding auditors and end-users.
O-Weld: The Future of Precision Brazing
The “Why”: Traditional oxy-acetylene setups are bulky, expensive, and introduce safety risks with stored gas cylinders. Inconsistent flame quality leads to weak joints—the primary cause of leaks in HVAC and electrical assemblies.
The “When”: Switch to O-Weld when you want to simplify your shop floor. By generating high-energy gas from water on-demand, you get a cleaner, more consistent flame that virtually eliminates “dry joints” and brazing defects, ensuring your product passes its leak test the first time.
Optimeasure Proprietary Solutions
OptiBurst: Compliance Without the Complexity
The “Why”: You shouldn’t have to pay for a £20k NDT system just to find out at what pressure a bag pops. Many medical and food packaging manufacturers are over-complicating their QC labs with multi-function machines that are difficult to calibrate and even harder to use.
The “When”: Use OptiBurst when you need a dedicated, no-nonsense tool for ASTM F1140 burst testing. It is the cost-effective “point-and-shoot” solution for testing the ultimate strength of flexible packaging, giving you the exact data you need without the unnecessary software bloat.
OptiVac: The Ultimate Visual “Reality Check”
The “Why”: Sometimes, even the most expensive sensor can be fooled by a “stretchy” pack or high background noise. You need a way to physically see where a seal is failing without destroying the product or creating a mess.
The “When”: Deploy OptiVac for immediate spot-checks on the production line. By using a controlled vacuum to force air out of submerged seals, it provides an undeniable visual stream of bubbles from any leak point. It is the most reliable way to verify seal integrity in food pouches and medical trays where visual confirmation is the gold standard for quality.
Frequently Asked Questions
Measurement Sensitivity: Ensuring the sensors are capable of detecting the specific allowable criteria for your components.
Cycle Time and Throughput: Balancing the "soak time" required for a stable reading with the production speed required by your facility.
Complex Testing Requirements?
Patient Centered Care
Quality Improvement
Find Your Nearest Lab And Schedule An Appointment
Error: Contact form not found.
Building Positive & Safe Patient Focused Culture.
